How To Change Battery In Key Fob Subaru

To Access The Fob, Remove The Glove Box Key By Pressing The Silver Button And Using It To Push.

You'll need a flat head screwdriver, steak knife, or the key fob key (; For a fob with a springing key, press the spring button on the fob or pull the key forward to get it out of the way. New subaru key fob (rectangle) purchase a new 2032 battery.

Make Sure The New Battery Is Facing The Same Way As The Old One.

Hold the button down while pulling on the key to remove it. If kept in close proximity, the key fob and the car will constantly talk to each other. Subaru key fobs from the past (teardrop) look for a little gap between the front and rear of the key fob in the seam.

Then, Remove Your Key From The Starter.

Use the right screwdriver to avoid damage to the screw or. If you have the key it's still pretty easy. Start by removing the screw that is holding the back cover in place.

You Should Hear Another Chime.

Replacing battery of access key fob. Insert the control module back into the key fob, making sure all the buttons line up. When i discuss up and down, it's based off hanging position, and not held in.

Just Push It Into The Small Slot And Break It Open.

Use the pointy end of the spudger to remove some of the gunk/buildup within the key fob. Refer to “replacing battery of access key. To install a replacement battery in your subaru key fob, you should follow the instructions that came with it.