How To Open Hyundai Key Fob To Replace Battery. 5 steps to replace the battery in hyundai key fob. Carefully lift the circuit board to expose the battery.
Key fobs vary, if you do not have a slot running. Using your key, turn your hyundai to the “acc” (accessory) position on your ignition. So, while you may feel like you’re breaking your fob when.
Then Push Gently Until You Feel That The Internal Key Is Extracted And Take It Out With Caution Since Its Touch May Be Fragile.
Once you've replaced your hyundai key fob's battery, it'll be time to reprogram it. Take out the metal key in your hyundai key fob by pressing and holding the remove the metal key in your hyundai key fob by pressing and holding the metal tab or button, then use it to open the back cover by inserting it into. Use a flat head screwdriver to pry open the case.
How To Change The Hyundai Key Fob Battery:
If the screwdriver slips, it can injure you. In the slot that is now visible down the side, use the smart key end or a screwdriver to pry open the cover. Hold the “open” or “unlock” button on the key fob until your car lights flashes.
Procedure Remove Your Hyundai Key From Your Keychain.
In the slot put a flat screwdriver of the appropriate size. First, use your thumb to press the button on the front of your key fob. Once you have your key fob open, gently lift the circuit board to expose the battery.
Set Aside The Fob Half With Buttons And Remove The Barrier And The Circuit Board.
Insert your key into the groove between release button and key slot. All you need is a replacement cr 2032 3v battery. Replacing your hyundai key fob's battery is straightforward.
Use A Coin Or A Flat Blade Screwdriver To Pop Open The Key Fob From The Small Notch Or Indent Along The Outside.
If you drive a newer hyundai model, you will open your key fob differently. Above the hole on which you have pulled the emergency key, there is a small slot. Carefully open the battery case and note the old battery.